How Much Water Does A Bath Use In Litres

How much water does a bath use in litres? If you are in the market for a new bathtub and have already taken the measurements for the tub itself, it’s also important to know the weight of the bathtub once it has been filled with water.

Bathtubs obviously weigh much less when they are empty as compared to when they are full of water. In general, a gallon of water translates to around eight pounds of weight.

Therefore, if you have a bathtub that is capable of holding 120 gallons of water, the weight of the bathtub is likely to be 960 pounds. Needless to say, this is going to put a considerable amount of pressure on the floor of your bathroom as well.

Keep in mind that you also have to account for your own weight as well. That, along with the weight of the tub, can add up to a significantly heavy figure.

How Much Water Does A Bath Use In Litres

Depending on the type, size and installation of your bathtub, a bathtub can use between 50 to 150 litres for each fill and this also depends on the availability of water or water level.

It is important to understand that there is no fixed size of bathtubs in general. The smaller and the most common size that you are going to find in the market is capable of holding around 80 gallons of water.

On the other hand, there are certain variants that are designed only for children. These ones are obviously smaller in size and weight, and are capable of holding around 40 gallons of water.

Don’t think that you can lie in such a big bathtub on your own. On the other hand, the bigger bathtubs usually start from 100 gallons, and can hold around 120 gallons at max.

There are some that are even bigger than this, but you will have to get one custom designed depending on the size of your bathroom.

Corner Bathtubs

You should also know that it’s not necessary to have the bathtub fitted on the ground in your bathroom. Instead, you can go for a freestanding bathtub, or choose a corner model.

Needless to say, freestanding models are considerably larger than the corner models. They are also quite expensive. Freestanding bathtubs are designed for either single person use or you can buy one that accommodates two people as well.

The water capacity starts from 90 gallons and can go all the way to 120. On the other hand, corner models are much smaller. They can hold a maximum of 60 gallons at most, though these ones are also rare to find.

In most cases, the common ones you will find are capable of holding approximately 40 gallons of water. If you have a heater installed in your bathtub, you may want to take a look at its maximum capacity as well.

Keep in mind that in most cases, a larger water heater can hold upwards of 40 gallons of water. That’s a significant amount, so you can imagine just how much water is wasted every time you decide to take a hot bath!

How to Save Water When Bathing

Water is a scarce resource, and the world is rapidly running out of it. If you have fresh, clean water in your house, you should know that it’s a luxury for most people around the globe.

Only a very small percentage of the population is able to afford these necessities. Instead of wasting water, you need to learn how to conserve it. It’s no secret that baths consume a humongous amount of water.

It’s imperative that you learn to save some of it to play your role in saving the environment. Here’s what you can do to save water the next time you go in the bathroom.

Go for a Shower

If you want to save both water and time, it’s an excellent idea to take a shower instead of a bath. An average bath uses up around 40 gallons of water, whereas a shower hardly requires 10.

You can even cut down on that figure if you know how to conserve water properly. For instance, when you are applying soap or lotion on your body, there’s no reason for you to keep the shower running. These are excellent ways to conserve water.

Get a More Efficient Shower Head

There are highly efficient shower heads available that allow you to save on the water supply every time you turn the knob in the shower.

These are also known as low flow shower heads, and have a reduced rate of water flow. Obviously, this might not be something you like, especially if you prefer the water falling hard on your body.

These shower heads have an adjustable flow rate, so you can always make changes according to your requirements. They are an excellent choice for people who want to limit the amount of water that they use.

Turn Off the Water When Not Bathing

When you are in the shower, you are going to do quite a few things. For instance, you will have to apply soap on your body, shampoo your hair, and then condition it.

Not only that, but some people also like to shave their legs when they are in the shower. If you are one of those, it’s always better to close the water supply while you are doing these things.

Why waste water on the side when you are not even in the shower? In fact, you might want to try going for a sponge bath. Sponge baths may seem like they are only designed for people with impaired movement, but that’s not true.

If you are serious about cutting down on the amount of water that you use, taking a sponge bath is one of the best ideas to implement. You can take sponge baths on consecutive days, and go for full showers twice or thrice a week.

This way, you won’t even feel unclean when you do. It’s an excellent way to conserve water. Try to save as much water as possible in your daily life as well, because the world is running out of it!