Can You Take A Bath After Cleaning The Tub With Bleach?

Can you take a bath after bleaching the bathtub? Yes, you can take a bath after bleaching the bathtub. After clearing the bathtub with the bleach and water solution, wait for 6 – 10 minutes. …

Can You Take A Bath After Cleaning The Tub With Bleach

Can you take a bath after bleaching the bathtub?

Yes, you can take a bath after bleaching the bathtub. After clearing the bathtub with the bleach and water solution, wait for 6 – 10 minutes. Next, rinse the bathtub thoroughly with water until you can’t smell any fumes. It is then safe to take a bath.

In this guide, I will explain to you how to clean a bath safely and how to use bleach safely.

homemakeover banner footer

How to Clean Bathtub with Bleach

Cleaning your bathtub should be a breeze and requires only a few simple steps. First things first; you’ll want to get your hands on some bleach. To give your bathtub a thorough cleaning, you’ll need around a half gallon of bleach.

Once you have your bleach handy, you will need to give your tub a bit of a rinse to make sure that there isn’t any soap or anything else still lingering in your tub.

Then, turn your water on and leave it running until it’s reached the maximum level of heat. The hotter the water, the more likely it’ll be able to kill germs and bacteria.

If you want, you can also boil water in cases your water doesn’t go past lukewarm. Be sure that you’ve plugged your tub so that the hot water fills up your tub.

When the tub is filled with water, you can go ahead and pour in the bleach. If you’re not sure how much bleach you should be using, check the bottle.

There you will be able to find the proper bleach-to-water ratio to use. After you’ve added the bleach, there’s nothing left for you to do but wait.

Set your timer for about 15 minutes to let your tub soak in all the bleach. Once time is up, you can start draining your tub. By this point, your tub should be looking as good as new.

If you find that there are still some spots left behind, you can always put the bleach-and-water solution into a spray bottle and use it to target those specific areas.

Make sure that once your tub has drained, you rinse it out with clean water to be sure that you’ve gotten all the bleach out of the tub.


Can You Take A Bath After Cleaning The Tub With Bleach? Is It Safe?

The good news is that it is safe for you to get into your tub for a soak once you’ve cleaned it with bleach, provided that all the fumes are gone.

If you’ve rinsed out your tub thoroughly after soaking it in the bleach, it should not be a problem for you. If you can still smell some of the bleach, open up a few windows or turn on your ventilator to let the tub air out. Once the smell is gone, feel free to hop in.

When using bleach, it is important to be careful as bleach is a powerful substance that can cause a lot of damage if not used properly. Be sure that your bathroom is properly ventilated so that you are not inhaling the dangerous fumes.

When handling bleach, be sure to wear old clothes or clothing that you don’t mind ruining as this chemical can permanently bleach your clothing.

Try to keep your skin from coming into clos contact with the bleach as it can also cause burns on your body. You should also never combine bleach with any other chemical as it can cause toxic gases.

Before cleaning your tub or any other area of your bathroom with bleach, be sure to remove any rugs, towels, or shower curtains to keep them from being stained.

[naaa bestseller=”bleach spray” template=”horizontal” max=5]

When Should You Not Use Bleach to clean a bathtub?

Believe it or not, there are times when using bleach may not be a good idea. This is especially true if your bathtub or shower has colors in it other than white that could fade with the frequent use of bleach, even when it has been diluted.

If your bathroom has different colors in it other than white, use oxygen bleach as an alternative. Oxygen bleach is created with peroxide and soda ash and can also disinfect your bathroom but without causing harm to the colors.

While oxygen bleach is less risky to use than regular bleach, you should still be cautious while using it. Keep in mind that using too much bleach too often can also cause corrosion, particularly on tubs that are coated with acrylic or enamel.

Other alternatives to using bleach include grapefruit and salt and baking soda and vinegar. When you use salt, the chloride in it combined with the acid from the grapefruit cleans and disinfects your tub just as effectively as any other cleaner would.

Simply cut your grapefruit in half and then sprinkle both sides with some salt. Then use the grapefruit to scrub your bathtub. When you’re done, rinse out the tub and it should be as good as new.

Cleaning out your tub with baking soda and vinegar is also useful. When combined, these ingredients create a bubbly reaction that helps cut through grime and dirt. If you do not have any vinegar handy, you can also try using just baking soda with water as a solution instead.


Keeping your bathtub clean is all part of having good hygiene. You may not be able to see it, but your tub begins to form a layer of grime caused by dirt, your body’s natural oils, soap, and more over time.

As a result, it is important to clean your tub on a regular basis. Using bleach mixed with hot water will surely get rid of any bacteria and germs left behind and leave you with a shiny, clean tub that’s ready to be used.

Leave a Comment